Barco R5976907/00 Projector User Manual


 
1. Safety Instructions
1.4 Service
Protection on Servicing
Attempt to alter the factory-set internal controls or to change other control settings not specially discussed in this manual can lead
to permanent damage to the projection unit and cancellation of the warranty.
Servicing
Do not attempt to service this projector yourse lf, as opening or removing covers may expose you to dangerous voltage potentia
land
risk of electric shock! Refer all projector servicing to a qualified Barco service center.
Replacement Parts
When replacement parts are required, be sure the service technician has used original Barco replacement parts or authorized re-
placement parts which have the same characteristics as the Barco original parts.
Unauthorized substitutions may result in degrad ed performance and reliability, fire, electric shock or others hazards
.
Unauthorized substitutions may void warranty.
Safety check
Upon completion of any service or repairs to this projecto r, ask t he service technician to perform safety checks to determine that the
projector is in proper operation condition.
Possible Explosion Hazard
Xenon compact arc lamps are under high pressure. The Lamp must be handled w ith great care. They may explode if dropped or
mishandled.
Whenever the protective cover is removed from the lamp, authorized protective clothing MUST be worn.
1.5 Optical performances
Summary
To ensure th e highest optical performance and resolution, th e projector lenses are specially treated with an anti-reflective coating.
Therefore, avoid touching the coated lens surface.
To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solutions or thinner. Follow the lens cleaning
procedure in the installation manual.
1.6 Cabinet maintenance
Summary
Always switch off power before you start cleaning the cabinet.
Do not use liquid cleaners or aerosol cleaners. Use a da
mp cloth for cleaning.
To keep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly
dampened with mild detergent solution.
Never use stro ng solvents, such as thinner or benzine or abrasive cleaners, since these will damage the cabinet surface.
4
R5976907 D-CINE PREMIERE DP100 02/11/2005