Filter
Top Products
8-10
Random Access Adjustment Mode
5975938 BARCOREALITY 9200TCR+ 020798
Size
Highlight Size by pushing the control disc up or down and press
ENTER to select.
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size,
The upper side of the image is fixed (table and ceiling mounted
configurations) and only the lower side can be moved to its exact
position.
When adjusting the horizontal size, the left side of the image is fixed
and only the right side can be moved to its exact position.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
Example for table mount configuration
Horizontal size
adjustment
Vertical size
adjustment
Fixed sides
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
Side Keystone
Highlight Side Keystone by pushing the control disc up or down and
press ENTER to select.
The side keystone adjustment is used to align the image if the projector
is mounted at a non-standard projection angle.
Push the control disc to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control disc to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control disc to the right. The number indication below
the bar scale will be positive.