Filter
Top Products
Connections
3-45975039 BARCOVISION 508 120198
Connecting a Component source.
YUV analog input terminals with sync input or with sync on the
luminance (Y) input.
YsUV or YUVS input selection
a. Press digit button 6 (for YsUV) or 7 (for YUVS) on the RCU or
b. With the local keypad :
- Press ADJUST key, the General access menu is displayed on the
screen.
- Use the control stick to highlight 6 (7 for YUVS).
- Press ENTER to select the highlighted source.
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6 7
3 4
1 2
Enter ADJUST
Connecting a RF signal to the projector: (optional)
The projector automatically detects the presence of a tuner.
Connect the RF signal to the RF input of projector
Connect the audio output to an audio amplifier.
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6 7
3 4
1 2
TUNER
Enter ADJUST
Professional VCR
Audio amplifier
TV antenna or
TV cable network
Audio amplifier
To select the tuner option :
a. Press the BARCO key to activate the tuner mode or
b. With the local keypad :
- Press ADJUST key to display the General access menu on the
screen.
- Use the control disc to highlight Tuner.
- Press ENTER to activate the tuner mode.