2.8 PCMCIA: PC Card Slot
The UNO-2170
provides one PC
Card slot that supports CardBus
(Card-
32) cards and 16-bit (PCMCIA 2.1/JEIDA
4.2) card standards. It supports
+3.3 V, +5 V and +12
V @
120
mA
working voltage.
The
PC Card
is
85.6 mm
long
by 54 mm wide (3.37" x 2.126"),
use a
68-pin connector
and a
removable module
standardized by
PCMCIA that is known as
“PCMCIA card
"
.
PS: PCMCIA interrupt
assignment is
IRQ 9.
2.9 VGA Display Connector
The UNO-2170
provides a
VGA controller (Intel 855/852 GME, supports a
single 1.5V accelerated graphics port interface) for a
high resolution VGA
interface.
It supports CRT Mode: 1280 x 1024 @ 32bpp (60Hz), 1024 x 768
@ 32bpp (85Hz); LCD/Simultaneous Modes: 1280 x 1024 @ 16bpp(60Hz),
1024 x 768 @16bpp(60Hz)
and up to 32
MB shared
memory.
The VGA interface is reserved for
system testing and debugging. The
UNO-2170's JP8 is
a 6-pin mini connector and CN7 is a 15-pin connector for
a VGA
monitor. A VGA
cable is
attached to
convert from a 6-pin mini
connector to
standard
VGA connector. You can
choose one of
the VGA
interfaces for system
testing
and debugging.
Pin
assignments for the VGA
display are detailed in
Appendix A.9.
UNO-2170 User Manual 14