Filter
Top Products
INSTALLATION
12
Initial Network Configuration
7. Under Setting &
Configurations, click on
“Network”. (Note: Uncheck
“DHCP” check box.)
8. Enter the desired network
settings and click on
“Apply Changes” to save
new network settings.
9. Reset the local IP address settings on the computer used for configuration
of the RIPC.
Connecting the RIPC to the Network
Connect the RIPC to the network using a straight-through RJ45 Category 5
network cable.
P74238-A-F1DE101G-man.qxd 4/10/03 4:25 PM Page 12