Filter
Top Products
SECURITY
27
SSL Certificate Signing Request
Note: If you destroy the CSR on the RIPC, there is no way to get it back! If you
delete it by mistake, repeat the three steps.
Settings & Configuration Network
Network Settings Parameters
Parameter Description
IP address IP address in the usual dot notation.
Subnet mask The net mask of the local network.
Gateway IP address The gateway of the network.
1. DNS Server IP IP address of the primary Domain Name Server in dot notation. This
option may be left empty, however, the RIPC won’t be able to perform
name resolution.
2. DNS Server IP IP address of the secondary Domain Name Server in dot notation. It
will be used in case the Primary DNS Server can’t be contacted.
Enable Power If this option is enabled, access over the Power Management Unit is
Management Unit possible. For this reason, to ensure the best level of security, we
recommend you disable this parameter.
(Note: Changing the network settings of the RIPC might result in lost connections.
If you change the settings remotely, be sure all the values are correct so that you
will still be able to access the RIPC.)
P74238-A-F1DE101G-man.qxd 4/10/03 4:25 PM Page 27