Filter
Top Products
31
7. Add the Print Server’s IP address and the queue name of the printer you
want to select for the port. The queue name “lp1” will point the port to
the printer connected to the printer 1 USB port on the Print Server. The
queue name “lp2” will point the port to the printer connected to the
printer 2 USB port on the Print Server.
8. Click “OK” to close.
Warning: When manually configuring the Port Monitor to send jobs to a specific
printer, make sure that the correct printer driver is selected and that
the Port Monitor’s queue name corresponds to the USB port that the
printer is connected to on the Print Server. Mismatching the drivers or
queue names will result in failed print jobs or error prints of multiple
pages of indiscernible characters.
BELKIN PORT MONITOR ADVANCED MENU
P74390-A_F1UP0001_man.qxd 11/25/03 4:06 PM Page 31