Filter
Top Products
a. Printer 1/Printer 2
These ports are used to connect one or two USB printers.
Note: These ports cannot be expanded using a USB hub.
b. Ethernet Port
This port is used to connect the Print Server to an Ethernet network via CAT5 cable.
Note: Using this port will automatically disable wireless functionality in the Print Server.
c. Reset/Test Button (3 functions)
Print Page: For most printers, this function results in a test page to be printed. The
test page will include Print Server settings including the IP address and other
information that might be handy for troubleshooting the Print Server. To print test
page, depress the Reset/Test button momentarily.
WARNING: Some printers do not support this function.
Reset: To reset or reboot the Print Server to existing settings, depress the Reset/Test
button for five or more seconds.
Restore Factory Defaults: To restore the Print Server to factory defaults, depress the
Reset/Test button for 10 seconds while powering up the Print Server.
OVERVIEW
5
a cb
P74390-A_F1UP0001_man.qxd 11/25/03 4:06 PM Page 5