Filter
Top Products
16
Installation Procedure
10. To set up the IP address of the Print Server, the default
is set to “DHCP” for the TCP/IP configuration.
The Print Server by default will try to get an IP
address from the connected Belkin Router running
the Dynamic Host Configuration Protocol (DHCP)
server and the following screen will appear.
The newly assigned TCP/IP settings will be displayed in the
“TCP/IP Configuration” window for your reference. Click
“Next” to continue on to step 3 in the installation process.
1
2
3
4
5
6
7
8
9
10
11
section