Filter
Top Products
30
Operating Print Server & Using the MFPs
After you have followed the Installation Wizard to finish the printer
installation, the printer is now connected to your computer. You can
start sharing print, scan, card-reader, or fax functions provided by
the MFP.
Tip 1: If you have finished using the printer, click
“Disconnect” to release the printer. Another user
cannot use the printer until it is released.
Tip 2: We recommend that you enable the “Idle Timeout”
setting. The Print Server will automatically release your
connection to the printer after a period of idle time that you
have assigned. This allows the printer to not be occupied too
long and other users to share the printer frequently. Refer to
the “All-In-One Print Manager” section for more information.
Share Print
The printer will be added to “Printers and Faxes” in Windows after
the printer is installed. When you have connected to the printer by
clicking “Connect” in the Belkin All-In-One Print Manager, the Print
Server will automatically create the connection between the printer
and your computer, and then you can print a document following the
same steps as usual.
Operating Print Server & Using the MFPs
1
2
3
4
5
6
7
8
9
10
11
section