Filter
Top Products
Using the Web-Based Advanced User Interface
25
section
2
1
3
4
5
6
7
8
9
10
11
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static IP connection is less common than other connection types. If your
ISP uses static IP addressing, you will need your IP address, subnet mask, and
ISP gateway address. This information is available from your ISP. Type in your
information, then click “Apply Changes”
(4)
. After you apply the changes, if your
Router is set up properly, the “Internet Status” indicator will read “Connected”.
1. IP Address
Provided by your ISP. Enter your IP address here.
2. Subnet Mask
Provided by your ISP. Enter your subnet mask here.
3. ISP Gateway Address
Provided by your ISP. Enter the ISP gateway address here.
(2)
(3)
(1)
(2)
(3)
(4)