Filter
Top Products
Using the Web-Based Advanced User Interface
31
section
2
1
3
4
5
6
7
8
9
10
11
system as the original MAC address and will allow the connection to
work. If you are not sure whether your ISP needs to see the original
MAC address, simply clone the MAC address of the computer that
was originally connected to the modem. Cloning the address will not
cause any problems with your network.
Cloning your MAC Address
To clone your MAC address, make sure that you are using the
computer that was ORIGINALLY CONNECTED to your modem before
the Router was installed. Click the “Clone” button
(1)
. Click “Apply
Changes”
(3)
. Your MAC address is now cloned to the Router.
Entering a Specific MAC Address
In certain circumstances you may need a specific WAN MAC address.
You can manually enter one in the “MAC Address” page. Type in a
MAC address in the spaces provided
(2)
and click “Apply
Changes”
(3)
to save the changes. The Router’s WAN MAC address
will now be changed to the MAC address you specified.
(1)
(2)
(3)