Filter
Top Products
69
Troubleshooting
69
section
2
1
3
4
5
6
7
8
9
10
12
and 0-9. For 128-bit WEP, you need to enter 26 hex characters.
For example:
C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key
6. Click “Apply Changes” to finish. Encryption in the Wireless
Router is now set. Each of your computers on your wireless
network will now need to be configured with the same
security settings.
WARNING: If you are configuring the Wireless Router or Access
Point from a computer with a wireless client, you will need to ensure
that security is turned on for this wireless client. If this is not done,
you will lose your wireless connection.
Note to Mac users: Original Apple AirPort
®
products support
64-bit encryption only. Apple AirPort 2 products can support
64-bit or 128-bit encryption. Please check your Apple AirPort
product to see which version you are using. If you cannot configure
your network with 128-bit encryption, try 64-bit encryption.
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP)
security on a Belkin Wireless Card.
Solution:
The Wireless Card must use the same key as the Wireless Router or
access point. For instance, if your Wireless Router or access point
uses the key 00112233445566778899AABBCC, then the Wireless
Card must be set to the exact same key.
1. Double-click the “Signal Indicator” icon to bring up the Wireless
“Network” screen.
2. The “Advanced” button will allow you to view and configure
more options of the Card.
3. Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card.
4. Under the “Wireless Network Properties” tab, select a
network name from the “Available networks” list and click the
“Properties” button.
5. Under “Data Encryption” select “WEP”.