Filter
Top Products
14
Using the MediaPilot Keyboard
15
Operation Keys (cont.)
Key Name Default Function
P11 Programmable key
P12 Programmable key
1 Numeric 1
2 Numeric 2
3 Numeric 3
4 Numeric 4
5 Numeric 5
6 Numeric 6
7 Numeric 7
8 Numeric 8
9 Numeric 9
0 Numeric 0
Enter Select current menu option
Up Arrow Navigate up in menu
Down Arrow Navigate down in menu
Left Arrow Navigate left in menu
Right Arrow Navigate right in menu
Channel Up DVD/CD = Next track
Other = Channel up
Channel Down DVD/CD = Previous track
Other = Channel down
Power Turns power to a device on or off
1
___
2
___
3
___
4
___
5
1
___
2
___
3
___
4
___
5
Using the MediaPilot Keyboard
Device Selection Keys
There are two types of device selection keys—fixed and
variable. The function of a fixed device selection key
is associated with a particular device type. A variable
device selection key can be programmed to use a variety
of different devices.
Fixed Device Selection Keys
Tuner - Selects an AV receiver TV - Selects the TV
CD - Selects a CD player Tape - Selects a VCR
DVD - Selects DVD player
The brand of the device to be controlled by the IR remote
must be identified by using the MediaPilot software. Use
the following procedure.
1. Launch the MediaPilot Control Center and select the
“AV Key Programmer” tab.
2. Press the “P” (Program) key in combination with
one of the fixed device-type keys (Tuner, DVD, TV,
CD, Tape).
3. Type in the four-digit device code that corresponds
to the device to be controlled. The device codes may
be found on the “Device Chart” included in Appendix
1 of this User Manual.
4. Press the “P” (Program) key again.
Note: If the sequence above is not completed within
60 seconds, no changes will be saved.