Filter
Top Products
Hardware Installation
4
2. Plug the USB cable into an available USB port on
your computer. (See Fig. 2)
3. To properly synchronize the keyboard and base
station, follow the procedure below.
a) Press the “Connect” button on the bottom of the
base station. (See Fig. 3) You will notice that the
“Connect” LED on the base station is flashing.
(See Fig. 4)
Hardware Installation
5
b) Press the “Connect” button on the bottom of the
keyboard. When the keyboard and base station
are synchronized, the “Connect” LED will stop
flashing. (See Fig. 5)
1
___
2
___
3
___
4
___
5
1
___
2
___
3
___
4
___
5
Fig. 3
Fig. 4
Fig. 5
Fig. 2