Filter
Top Products
51
Manually Configuring your Router
Manually Configuring your Router
51
Manually Configuring your Router
section
2
1
3
4
5
6
7
8
9
10
11
12
6. Select “TKIP” or “AES” under “Data Encryption”. This setting will have to be
identical to the Router that you set up.
7. Type in your encryption key in the
“Network Key” box.
Important: Enter your Pre-Shared key.
This can be from eight to 63 characters
and can be letters, numbers, or symbols.
This same key must be used on all of the
clients that you set up.
8. Click “OK” to apply settings.
Wireless Bridge
Wireless Bridging or Wireless Distribution System (WDS) is used to connect Wireless
Routers and Access points together to extend a network.
Click on the Drop down menu next to ‘Bridge Mode’ to select either:
Disabled:
To disable
Wireless
Bridging
(default)
Manual:
To enter
the wireless
MAC
address(es)
of the
Access
Points to
bridge with,
manually.