Filter
Top Products
18
OmniView
®
SMB CAT5 216/232 Switch
SECTIONSTable of Contents 1 2 4 53
WEB INTERFACE
LAN
Under LAN in Figure 14, is the following:
Enable DHCP – When a DHCP server is active on the same network
to which the Switch is connected, DHCP provides automatic IP
assignment.
When DHCP is disabled (Recommended) – You can assign a fixed IP
address to Switch.
Consult your network administrator regarding the use of the DHCP.
When DHCP is disabled, enter the IP Address, Subnet Mask, and
Default Gateway for LAN, as given by your network administrator.
These parameters can be configured locally from the OSD as explained
on page 14.
Administration > User Settings
From the menu, click “User Settings” and Figure 16 appears.
Figure 16 User Settings
On this page, an administrator creates and edits users.
There are three levels of user access:
• Administrator
• User
• View only