Filter
Top Products
24
OmniView
®
SMB CAT5 216/232 Switch
SECTIONSTable of Contents 1 2 4 53
WEB INTERFACE
Figure 23 Restore factory settings
Restore Factory Settings
You can restore the Switch to the factory settings. This restores the
original Switch parameters, resetting all the information added by
the administrators, including network settings*, servers, users, and
passwords, etc.
*You have the option to preserve network settings, explained below.
Warning! Once reset the data cannot be retrieved.
To restore factory settings:
1. From the menu, select “Restore Factory Settings”. The Restore
Factory Settings page appears (see Figure 23).
2. Check the box if you want to preserve network settings.
3. Click .
Set Time and Date
The time and date set feature is used when recording log events. To set
the time and date:
From the menu, select “Time & Date” and Figure 24 appears.
Figure 24 Set Time & Date
Type the appropriate parameters.