Filter
Top Products
21
OmniView
®
SMB CAT5 216/232 Switch
SECTIONSTable of Contents 1 2 4 53
WEB INTERFACE
Administration > Server Access List
By default, access is allowed to all servers for administrators. For other
users, define the access rights of each user separately.
To do so:
1. From the menu, click “Server Access List”. The Access List
Configuration window will appear (see Figure 18).
Figure 18 Server Access List Configuration
2. Select a user from the user drop-down menu.
3. Check the target servers the user can access (according to his or
her access permissions). To select all target servers, click .
4. Click to save the selection.
5. Repeat the steps above for additional users.
Security > Settings
Configure the security features, such as Account Blocking, Password
Policy, and Idle Timeout, as explained below.
From the Security section, click “Settings”. The “Security > Settings”
page appears (see Figure 19).
Figure 19 Security Settings