Filter
Top Products
22
OmniView
®
SMB CAT5 216/232 Switch
SECTIONSTable of Contents 1 2 4 53
WEB INTERFACE
Security Settings fields:
Account Blocking – Decide on the number of attempts to log in with a
wrong user name or password, after which there is a time lock or a
total block.
Password Policy
For local and remote users, you have the option of a standard or high
security level of password. The table below shows the parameters of the
two options.
Standard
security policy
High security policy
6 characters or
more
8 characters or more, must include at least 1
digit and 1 uppercase letter, and 1 “special”
character as follows: !@#$%^*()_-+=[]’:;?/
Must not include
the user name
Must not include the user name
Check the box to enable the high security password policy. If left
unchecked, the standard security policy applies.
OSD password enabled – For the local user, access to the OSD can
be password enabled or disabled (default), with the option of a standard
or high security level of password as explained above. Select the check
box to enable password.
Note! The user access permissions are the same whether access is
done locally or remotely.
Idle Timeout – Select the timeout inactivity period after which the user is
disconnected from the system. Choose “No Timeout” to disable timeout.
Click to save any security changes.
Security > SSL Certificate
You can install an SSL certificate.
To do so:
From the menu, select “SSL Certificate”. The Install SSL Certificate page
appears (see Figure 20).
Figure 20 Install SSL Certificate page
Certificate File – Browse to locate the “cer” file (.ssl format).
Private Key File – Browse to locate the “private key” file (.pem format).
Key Password – Type the key password.
Click . The certificate installs. The device restarts automatically.