BenQ MP510 Projector User Manual


 
Introduction10
Controls and functions
Projector
1. Focus ring (See "Fine-tuning the picture
clarity" on page 26 for details.)
Adjusts the focus of the projected picture.
2. Temperature warning light (See
"Indicators" on page 45 for details.)
Lights red if the projector’s temperature
becomes too high.
3. Power indicator light (See "Indicators" on
page 45 for details.)
Lights up or flashes when the projector is
under operation.
4. Power (See "Start up" on page 21 and
"Shutting down the projector" on page 32
for details.)
Turns the projector on or off.
5. Keystone/Arrow buttons ( / Left, /
Right)
Manually corrects distorted pictures
resulting from an angled projection.
Selects the desired menus and to make
adjustments.
See "Correcting keystone" on page 25 and
"Using the OSD menus" on page 34 for
details.
6. BLANK (See "Hiding the picture" on page
30 for details.)
Used to hide the screen picture.
7. MODE (See "Selecting a picture mode"
on page 27 for details.)
Sequentially selects a predefined picture
setting available for each input.
8. EXIT (See "Using the OSD menus" on
page 34 for details.)
Exits and saves the menu settings.
Selects the desired menu items.
9. Lamp indicator light (See "Indicators" on
page 45 for details.)
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
10. AUTO (See "Auto-adjusting the picture"
on page 25 for details.)
Automatically determines the best
picture timings for the displayed picture.
11. SOURCE (See "Switching input signal" on
page 24 for details.)
Sequentially selects the input signal D-
Sub/Comp. (Component Video),
S-Video
or
Video.
12. MENU (See "Using the OSD menus"
on page 34 for details.)
Turns on the On-Screen Display (OSD)
menu.
Selects the desired menu items.
1
2
3
4
5
6
7
8
9
10
5
11
12