Filter
Top Products
Operation 35
Picture menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Picture Mode
(PC: Dynamic;
YPbPr/S-Video/
Video: Standard)
Pre-defined modes are provided so you can optimize your projector
picture set-up to suit your program type.
You can use the remote control MODE button to select a predefined
Picture Mode. See "Selecting a picture mode" on page 27 for details.
Wall Color
(Off)
Correct the projected picture’s color when the projection surface is not
white.
Color
Temperature
(depends on the
selected Picture
Mode)
There are four color temperature settings available.
See "Selecting a Color Temperature" on page 28 for details.
Brightness
(depends on the
selected input
source)
Adjusts the brightness of the picture.
See "Adjusting Brightness" on page 28 for details.
Contrast
(depends on the
selected input
source)
Adjusts the degree of difference between dark and light in the picture.
See "Adjusting Contrast" on page 29 for details.
Color
(depends on the
selected input
source)
Increases or decreases the color intensity of the picture.
Tint
(50)
Adjusts the color tones of the picture. The higher the value, the more
reddish the picture becomes. The lower the value, the more greenish the
picture becomes.
When a Video or S-Video signal is connected, the function is only
available with NTSC system selected.
Sharpness
(15)
Adjusts the picture to make it look sharper or softer.