BenQ MP510 Projector User Manual


 
Operation38
Advanced menu
FUNCTION
(default setting /
value)
DESCRIPTION
(default setting / value)
Mirror
()
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. Contact your dealer for the ceiling mount bracket
(optional accessory) if you need to install the projector on your ceiling.
See "Choosing a location" on page 13 for details.
Source Scan
(On)
Sets whether the projector searches automatically for input signals. If the
source scan is On, the projector will scan for input signals until it acquires
a signal. If the function is not activated, the projector selects the last used
input signal. The default value is 'RGB'.
Language
(English)
Sets the language for the OSD menus.
There are 17 languages for your choice: English (default), French,
German, Italian, Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Korean, Swedish, Dutch, Turkish, Czech, Portuguese,
Thai, and Polish.
Splash
Screen
(BenQ logo)
Select which logo screen will display during projector start-up. Three
modes are available: BenQ logo, Black screen, and Blue screen.
High Altitude
Mode
(Off)
A mode for operation in areas like high altitude or high temperature.
See "Operating in a high altitude environment" on page 31 for details.
Auto Off
(Off)
Sets the projector to turn off automatically if no input signal is detected
after a set period of time.
See "Switching input signal" on page 24 for details.
Economic
Mode
(Off)
Use this mode to reduce system noise and reduce power consumption by
20%. If this mode is activated, the light output will be reduced and result
in darker projected pictures.
Setting the projector in Economic mode extends the lamp timer
automatic shutdown feature. For details on how the total lamp hour is
calculated, see "Calculation of lamp hour" on page 41.
Presentation
Timer
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 29 for details.
Timer Activate (Off): Turns the presentation timer on or off.
Timer Period (60 min.): Sets a preferred length of time for presentation.
Display Timer (Always): Sets whether to display the timer on screen.
Timer Position ( ): Sets the position where the timer displays on screen.
Timer Counting Direction (Count Up): Sets the timer counting direction.