Filter
Top Products
Introduction 11
English
Remote control
1. IR transmitter
Tranmits signal to projector.
2. POWER
Toggles the projector between standby
mode and on. See "Starting up the
projector" on page 25 and "Shutting down
the projector" on page 49 for details.
3. Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See "Using the menus" on page 26 for
details.
4.
Freeze/unfreezes the video. See "Freezing
the image" on page 42 for details.
5. /
Left cursor:
Navigates and changes settings in the
OSD. See "Using the menus" on page 26
for details.
:
Starts the FAQ function. See "Utilizing
FAQ function" on page 42 for details.
6. Blank
Hides the screen picture. See "Remote
paging operations" on page 41 for details.
7. /
Down cursor:
Navigates and changes settings in the
OSD. See "Using the menus" on page 26
for details.
KEYSTONE key:
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 32 for
details.
8. Digital Zoom +
ZOOM in or out.
9. Volume +
Adjusts volume. See "Adjusting the
sound level" on page 44 for details.
10. /
Up cursor:
Navigates and changes settings in the
OSD. See "Using the menus" on page 26
for details.
KEYSTONE key:
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 32 for
details.
11. Auto
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 31
for details.
12. Mode/Enter
Selects an available picture setup mode.
See "Selecting a picture mode" on page
36 for details.
Enacts the selected On-Screen Display
(OSD) menu item. See "Using the
menus" on page 26 for details.
5
3
10
2
46
4
11
12
13
14
1
7
8
15
9
16