Filter
Top Products
Operation 41
English
3. Highlight Yes and press MODE/ENTER to confirm. You will see the message
“Timer is Off” displaying on the screen.
Remote paging operations
Hiding the image
In order to draw the audience's full attention
to the presenter, you can use BLANK on
the projector or remote control to hide the
screen image. Press any key on the
projector or remote control to restore the
image. The word 'BLANK' appears at the
lower right corner of the screen while the
image is hidden.
You can set the blank time in the
SYSTEM
SETUP: Basic > Blank Timer
menu to let the projector return the image automatically
after a period of time when there is no action taken on the blank screen.
No matter
Blank Timer is activated or disabled, you can press any key except PAGE /
, ENTER on the remote control, or ENTER on the projector to restore the picture.
• Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Connect the projector to your PC or notebook with a
USB cable prior to using the paging function. See
"Connecting a computer" on page 18 for details.
You can operate your display software program (on a
connected PC) which responds to page up/down
commands (like Microsoft PowerPoint) by pressing
PAGE / on the remote control.
If remote paging function doesn't work, check if the
USB connection is correctly made and the mouse
driver on your computer is updated to the latest
version.
The remote paging
function cannot work with
Microsoft
®
Windows
®
98
operating system.
Windows
®
XP or higher
operating systems are
recommended.