Filter
Top Products
Operation54
English
Picture Mode
(Presentation)
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 36 for details.
Reference
Mode
(Dynamic)
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2 mode" on page 37
for details.
Brightness
(50)
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 37 for details.
Contrast
(0)
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 37 for details.
Color
(0)
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 38 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Tint
(0)
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 38 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
(15)
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 38 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Brilliant Color
(On)
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 38 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 38 for details.
3D Color
Management
See "3D Color Management" on page 39 for details.
Save Settings
Saves the settings made for User 1 or User 2 mode.
Quick Auto
Search
(On)
See "Switching input signal" on page 30 for details.
Color Space
Conversion
(Auto detect by
HDMI source)
Only action for HDMI Input source.
2. PICTURE menu
3. SOURCE
menu