Filter
Top Products
Operation32
English
Disabling the password function
To disable password protection, go back to the SYSTEM SETUP: Advanced > Security
Settings > Change Security Settings menu after opening the OSD menu system. Press
MODE/ENTER. The message 'INPUT PASSWORD' displays. Enter the current
password.
i. If the password is correct, the OSD menu returns to the Security Settings page.
Press to highlight Power on Lock and press / to select Off. You will not
have to enter the password next time you turn on the projector.
Press to highlight Splash Screen Lock and press / to select Off. The
Splash Screen function in the SYSTEM SETUP: Basic will become available.
ii. If the password is incorrect, the password error message displays lasting for three
seconds, and the message 'INPUT PASSWORD' displays for your retry. You can
press MENU/EXIT to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.