Filter
Top Products
Maintenance62
English
11. Restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
12. After the startup logo, open the On-Screen
Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced > Lamp Settings
menu. Press MODE/ENTER. The Lamp
Settings page displays. Press to
highlight Reset lamp timer and press
MODE/ENTER. A warning message
displays asking if you want to reset the lamp timer. Highlight Reset and press
MODE/ENTER. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
10. Press the lamp cover down until the
click is heard locking the projector.
Reset Lamp Timer?
Reset
Cancel
Notice