Filter
Top Products
Operation48
Picture menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Application
Mode
(PC:
Presentation;
YPbPr/ S-Video/
Video: Movie)
Pre-defined application modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting an
application mode" on page 38 for details.
Reference
Selects an application mode that most suits your need for the image
quality and further fine-tune the image based on the selections listed on
the same page below.
Brightness
(50)
Adjusts the brightness of the image.
See "Adjusting brightness" on page 39 for details.
Contrast
(0)
Adjusts the degree of difference between dark and light in the image.
See "Adjusting contrast" on page 39 for details.
Saturation
(0)
Adjusts the color saturation level -- the amount of each color in a video
image. Lower setting produces less saturated colors; setting to the
minimum value makes the image black and white. If the setting is too
high, colors on the image will be overpowering, which makes the image
unrealistic.
Hue
(0)
Adjusts the red and green color tones of the image. The higher the value,
the more greenish the image becomes. The lower the value, the more
reddish the image becomes.
Sharpness
(16)
Adjusts the image to make it look sharper or softer.
White Peak
(10)
Adjusts white peaking.
Color
Temperature
(T3)
There are four color temperature settings are available.
See "Selecting a color temperature" on page 39 for details.
Gamma
(Gamma 2)
Sets how gray shades are displayed between minimum input (black) and
maximum input (white) for all signals.
Save
Settings
Saves the settings made for User 1 or 2 mode.