Filter
Top Products
1. Overview
BenQ PE8700 User’s Manual
7
❚
Remote Control
ON
Hold this button down for
ONE second to turn the
projector on.
OFF
Press this button to turn
the projector off.
ANA (A
NAMORPHIC):
Expands an image with a 4:3
aspect ration linearly along
the horizontal axis to
provide full-screen display
with a 16:9 aspect ration.
STANDARD (4:3):
Displays the projected image
with a 4: 3 aspect raion in
the center of screen.
LB (Letterbox): Enlarges
an image in letter box format
to display in full-screen
format with a 16:9 aspect
ration with upper and lower
portion cropped.
WIDE: Expands an image
with a 4:3 aspect ratio
NON-linearly along the
horizontal axis to provide
full screen display with a 16:9
aspect ratio.
THRO (Through): One-
to-one mapping is
performing without any
scaling of the image. The
image is displayed at the
center of the screen.
V (VIDEO): Composite video
signal input.
S-V (S-VIDEO): S-Video signal
input.
CP (Component):
Component Y/C
B/CR input.
CP HD (Component HD):
DTV Y/P
B/PR signal input.
RGB HD: DTV RGBHV signal
input.
PC (DVI): Computer and DVI
signal input
DEFAULT
Restores the default settings for the
current input source.
Memory 1 : Restores settings
saved in memory 1
Memory 2 : Restores settings
saved in memory 2
Memory 3 : Restores settings
saved in memory 3
ARROW (c/e/d/f)
Used to select the menu or to make
various adjustments.
ENTER
Enters the setting for items shown
in the menu.
EXIT
Exits and saves the setting(s) of
items in the menu.
MENU
Turns the on-screen display control
menu on or off.
+: Enlarges the size of the
PIP window.
― : Shrinks the size of the
PIP window.
PIP (Picture-in-Picture)
Enables the PIP function. Use
the ARROW keys to adjust
the position of the PIP
window (Please see "PIP
(Picture-In-Picture)/POP
(Picture-On-Picture)
functions" on page 18.)
ACTIVE: Switches to the
active window in PIP display
mode.
POP (Picture-on- picture)
Enables the POP function. (
Please see "PIP (Picture-In-
Picture)/POP (Picture-On-
Picture) functions" on
page 18.)
LIGHT: Turns the backlight
of the remote control on.
SCREEN c : Control the screen
up directly. This function is only
available for BENQ's accessory
screen.
SCREEN d : Control the screen
down directly. This function is only
available for BENQ's accessory
screen.