Filter
Top Products
Positioning your projector14
English
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select. Take
into consideration the size and position of your screen, the location of a suitable power outlet, as
well as the location and distance between the projector and the rest of your equipment.
Your projector is designed to be installed in one of four possible installation locations:
1. Front Table
Select this location with the projector placed on a table in
front of the screen. This is the most common way to
position the projector for quick setup and portability.
2. Front Ceiling
Select this location with the projector suspended upside-
down from the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mounting Kit from
your dealer to mount your projector on the ceiling.
Set Front Ceiling in the SYSTEM SETUP: Basic >
Projector Position menu after you turn the projector on.
3. Rear Table
Select this location with the projector placed on a table
behind the screen.
Note that a special rear projection screen is required.
Set Rear Table in the SYSTEM SETUP: Basic > Projector
Position menu after you turn the projector on.
4. Rear Ceiling
Select this location with the projector suspended upside-
down from the ceiling behind the screen.
Note that a special rear projection screen and the BenQ
Projector Ceiling Mounting Kit are required for this
installation location.
Set Rear Ceiling in the SYSTEM SETUP: Basic >
Projector Position menu after you turn the projector on.
SYSTEM SETUP: Basic
Background Color
Language
Projector Position
Auto Power Off
Blank Timer
Sleep Timer
Panel Key Lock
Splash Screen
COMPUTER
Menu/Back
Exit
Front Table
Disable
Blue
BenQ
Source
Menu Settings
English
Off
Direct Power On
Off
Disable
Disable
*To set the projector position:
1. Press MENU/EXIT on the projector or
remote control and then press /
until the SYSTEM SETUP: Basic menu
is highlighted.
2. Press / to highlight Projector
Position and press / until the
correct position is selected.