Filter
Top Products
Operation 35
English
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available
when User 1, User 2 or User 3 mode is selected. You can make adjustments to these
functions based on your needs.
Adjusting Brightness
Highlight Brightness in the PICTURE: Basic menu and adjust the values by pressing /
on the projector or remote control.
The higher the value, the brighter the image. And lower
the setting, darker the image. Adjust this control so the
black areas of the image appear just as black and that
detail in the dark areas is visible.
Adjusting Contrast
Highlight Contrast in the PICTURE: Basic menu and adjust the values by pressing /
on the projector or remote control.
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.
Adjusting Color
Highlight Color in the PICTURE: Basic menu and adjust the values by pressing / on
the projector or remote control.
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting Tint
Highlight Tint in the PICTURE: Basic menu and adjust the values by pressing / on
the projector or remote control.
The higher the value, the more reddish the picture becomes. The lower the value, the more
greenish the picture becomes.
Adjusting Sharpness
Highlight Sharpness in the PICTURE: Basic menu and adjust the values by pressing
/ on the projector or remote control.
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
Adjusting Flesh Tone
Highlight Flesh Tone in the PICTURE: Basic menu and adjust the values by pressing
/ on the projector or remote control.
This function adjusts accurate color primaries resulting in natural looking flesh tones with
excellent color saturation.
+50
+30
+70
0
+30
-30