BenQ W1060 Projector User Manual


 
Positioning your projector 15
English
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable power
outlet, as well as the location and distance between the projector and the rest of your
equipment.
Your projector is designed to be installed in one of four possible installation locations:
1. Front Table
Select this location with the projector placed on a table in
front of the screen. This is the most common way to
position the projector for quick setup and portability.
2. Front Ceiling
Select this location with the projector suspended upside-
down from the ceiling in front of the screen.
Purchase the BenQ Projector Ceiling Mounting Kit from
your dealer to mount your projector on the ceiling.
Set Front Ceiling in the SYSTEM SETUP: Basic >
Projector Position menu after you turn the projector on.
3. Rear Table
Select this location with the projector placed on a table
behind the screen.
Note that a special rear projection screen is required.
Set Rear Table in the SYSTEM SETUP: Basic > Projector
Position menu after you turn the projector on.
4. Rear Ceiling
Select this location with the projector suspended upside-
down from the ceiling behind the screen.
Note that a special rear projection screen and the BenQ
Projector Ceiling Mounting Kit are required for this
installation location.
Set Rear Ceiling in the SYSTEM SETUP: Basic >
Projector Position menu after you turn the projector on.
*To set the projector position:
1. Press MENU/EXIT on the projector or remote control
and then press
/ until the SYSTEM SETUP:
Basic menu is highlighted.
2. Press
/ to highlight Projector Position and press
/ until the correct position is selected.
SYSTEM SETUP: Basic
Language
Projector Position
Operation Settings
Remote Receiver
Background Color
Splash Screen
PC
Menu/Back
Exit
Front Table
Front+Top
Menu Settings
Blue
English
BenQ