Filter
Top Products
Billion 800VGT Router
Factory
Default
Settings
Before
configuring
your router, you
need
to
know
the
following
default
settings.
Web Interface (Username and Password)
Username:
admin
Password:
admin
The
default
username
and
password
are
“
admin
”
and
“
admin
”
respectively.
If
you
ever
forget
the
username/password
to
login
to
the
router,
you
may
press
the
RESET
button
for
more
than
6
seconds
to
restore
the
factory
default
settings.
Device LAN IP settings
IP
Address:
10.0.0.2
Subnet
Mask:
255.255.255.0
ISP setting in WAN site
PPPoE Multisession (the router has the ability to accommodate multiple PPPoE sessions on the
same PVC in factory default state.
DHCP server
DHCP
server
is
enabled.
Start
IP
Address:10.0.0.100
IP
pool
counts:
100
LAN and WAN Port Addresses
The
parameters
of
LAN
and
WAN
ports
are
pre-set
in
the
factory.
The
default
values
are
shown
below.
LAN
Port
WAN
Port
IP
address
10.0.0.2
Subnet
Mask
255.255.255.0
DHCP
server
function
Enabled
IP addresses for
distribution
to
PCs
100
IP
addresses
continuing
from
10.0.0.100
through
10.0.0.199
The
WAN protocol has been
pre-selected and set by
Telkom for automated service
deployment and delivery.
17
Chapter
3:
Basic
Installation