Filter
Top Products
724-746-5500 | blackbox.com
Page 22
Black Box G.SHDSL.bis EFM CPE
2.6.5 DSL Status Command
The dsl show
status command shows the following DSL status information: link state,
sync state, link speed, error counters, line condition, noise margin, and test mode sta-
tus.
2.6.6 DSL Clear Errcntrs Command
The d
sl clear errcntrs command clears the error counters.
2.7 REMOTE CONSOLE
Provided that there is a DSL link to a second LB510A-R2, a user may login to the first
LB510A-R2’s console and enter the remote console command to access the second
LB301A-R2’s console. Using this remote console feature, the user can configure and
query the status of the second LB510A-R2 from a remote location. When the user is
finished with the remote console, the logout command can be used to return to the
local console.
2.7.1 Example Command Line Interface Session
LB510A-R2 Command Shell
Password:
LB510A-R2> dsl show status
configuration:
dsl mode: co
dsl timeslots: 89
annex: b
line probe: disabled
status:
actual rate: 0
loss of signal: unavailable
noise margin: 0
snr: 0
sync state: out of sync
link state: idle
test modes:
loopback: off
pattern: off
errors: 0
error counters:
crc: 0