Filter
Top Products
724-746-5500 | blackbox.com
Page 32
Black Box G.SHDSL.bis EFM CPE
5.1.2 How to Disconnect
The remote console session ends under any of the following conditions:
• The user enters the command l
ogout
• A timeout period of 5 minutes elapses since the user has entered a command to
th
e console.
• The DSL link drops.
The response upon logging out of the remote console session with the command
lo
gout is Console: Remote console connection lost. The following is what is displayed
upon a user’s logging out of a remote console session after logging in.
> remote console
>
Console: Remote console connection established.
password: ******
> logout
Console: Remote console connection lost.
>
The timeout period is a fixed, non-configurable parameter of 5 minutes. If the remote
LB510A-R2 (far-end) has received no command within 5 minutes, it automatically ter-
minates the RCS. Once the RCS is terminated, the PC (far-end) can establish a local
console session if desired. However if the PC (near-end) wishes to re-establish a RCS,
it is able to do so whether or not the PC (far-end) is in an active local session, because
the RCS has priority over a local console session. If the PC (near-end) establishes an
RCS while the PC (far-end) is on a local session, the PC (far-end) is kicked off.
5.1.3 Differences in local and remote control session behavior
Since the remote console session communication occurs over the G.SHDSL link’s
EO
C channel, some commands via the RCS have unusual effects.