Black Box 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU Switch User Manual


 
724-746-5500 | blackbox.com
Page 35
Reset configuration to factory defaults
A. SPECIFICATIONS
A.1 CLOCKING MODES
Internal, external or receive recovered
A.2 DTE RATE
All 64k steps from 64 to 5696 kbps
A.3 ETHERNET INTERFACE
• Four RJ-45
• 10/100base-t
• IEEE802.3 Ethernet
A.4 DIAGNOSTICS
V.52 compliant (511) pattern generator and detector with error injection mode con-
trolled by front-panel switch. Local and Remote Loopback control either by a front-
p
anel switch or from the DTE interface.
A.5 STATUS LED
A.5.1 P
OWER
(G
REEN
)
The Power LEDglows solid during normal operation. At startup, during the POST, the
L
ED blinks once every second. if the POST fails, the unit does not enter normal opera-
tion, and the LED blinks once every 0.4 seconds.
A.5.2 DSL (G
REEN
)
The DSL LED glows solid while a DSL link is established. While the DSL link is train-
ing, it blinks once every second.
A.5.3 L
INK
(G
REEN
)
The Link LED shows that there is an active physical network connection to the Con-
sole or an Ethernet device.
A.5.4 A
CTIVITY
(G
REEN
)