Filter
Top Products
ServSwitch Wizard VGA/USB
724-746-5500 | blackbox.com
Page 22
3.4 Video compensation (continued)
Once you have entered video compensation standby level, you can choose which adjustments to make. Generally you
should set the cable type and cable length options first. Then, if necessary, use the video gain and color skew adjustments to fine
tune the remote video image.
3.4.3 To set the cable type
a From standby, press . The Num Lock and Caps Lock indicators will flash.
b Type the number that corresponds to the category of link cable used:
• Press for Cat 5
• Press for Cat 5e
• Press for Cat 6
• Press for Cat 7
• Press for Cat 7a
c Press to save the value and return to standby.
Alternatively, press to discard any change and return to standby.
3.4.4 To set the cable length
a From standby, press . The Caps Lock and Scroll Lock indicators will flash.
b Use the keypad to enter the cable length in metres.
c Press to save the value and return to standby.
Alternatively, press to discard any change and return to standby.
Note: You can also increase or decrease the cable length setting from the standby level (and view the resulting change in
screen image quality) using
and respectively. If necessary, press to return to a neutral setting. Such adjustments to
the cable length setting are saved automatically.
3.4.5 To adjust video gain
a From standby, use and to decrease or increase the gain level. If necessary, press to return to a neutral setting.
Gain adjustments are saved automatically.
Num
Lock
Caps
Lock
Scroll
Lock
Num
Lock
Caps
Lock
Scroll
Lock