Filter
Top Products
ServSwitch Wizard VGA/USB
724-746-5500 | blackbox.com
Page 26
3.4 Video compensation (continued)
Once you have entered video compensation standby level, you can choose which adjustments to make. Generally you should set
the cable type and cable length options first. Then, if necessary, use the video gain and color skew adjustments to fine tune the
remote video image.
Dual-variants
By default, all video compensation changes that you make will affect both channels equally. If you wish to adjust the channels
separately:
• Enterthevideocompensationstandbylevel.Thegreenindicatorsonbothlinksocketsoftheremotemodulewillflash.
• Fromstandby,press . The keyboard indicators will alternate between the Num Lock and Scroll Lock, and the Caps Lock.
Press or to select the primary or secondary video display, respectively. The green indicator of the link socket
corresponding to the chosen video channel will flash (lower=primary, upper=secondary), the other will remain on.
• Maketherequiredcompensationchangestothechosenvideochannelusingthetechniquesdescribedbelow.
• Toreturntousingbothchannels,fromstandby,press and then press
The green indicators of both link sockets will flash.
3.4.3 To set the cable type
a From standby, press . The Num Lock and Caps Lock indicators will flash.
b Type the number that corresponds to the category of link cable used:
• Press for Cat 5
• Press for Cat 5e
• Press for Cat 6
• Press for Cat 7
• Press for Cat 7a
c Press to save the value and return to standby.
Alternatively, press to discard any change and return to standby.
3.4.4 To set the cable length
a From standby, press . The Caps Lock and Scroll Lock indicators will flash.
b Use the keypad to enter the cable length in meters.
c Press to save the value and return to standby.
Alternatively, press to discard any change and return to standby.
Note: You can also increase or decrease the cable length setting from the standby level (and view the resulting change in
screen image quality) using
and respectively. If necessary, press to return to a neutral setting. Such adjustments to
the cable length setting are saved automatically.
Num
Lock
Caps
Lock
Scroll
Lock
Num
Lock
Caps
Lock
Scroll
Lock