![](http://pdfasset.owneriq.net/8/ab/8ab4713e-cae2-45d9-9ac5-6bebee8b632c/8ab4713e-cae2-45d9-9ac5-6bebee8b632c-bg2f.png)
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 47
Chapter 4: E2 Controller
4.1.4 BMS Interface
The E2 series controller may incorporate a Building Management System (BMS) network card equipped with a communication
port (Figure 4-3). This can be field connected through a serial interface to a Building Management System via Modbus, BACnet,
SNMP, or HTTP protocol as configured by the factory. A controller intaced to a network must be configured for BMS
communication.
Figure 4-3. BACnet MS/TP BMS interface port.
Figure 4-4. Modbus RTU BMS interface port.
Figure 4-5. BACnet IP, BACnet Ethernet, HTTP, SNMP, and Modbus IP BMS interface port.