13
CHAPTER 4: Operation
The Remote Management Switch automatically detects the rate of operation,
allowing connection at 300 bps to 115.2 kbps. Using the default speed will allow
the fastest access to the unit. To invoke the auto rate detector, press the Enter key
one or more times as needed. When the Switch detects the rate, it will respond
with the security login prompt:
Login >
Enter the default security code (the default code is “TEST,” all caps, case-sensitive).
Three incorrect attempts to enter the security code will cause the Switch to
terminate the call. When you enter the correct code, the main menu appears.
Figure 4-1. Main menu.
4.2.1 P
ORT
S
ELECTION
From the main menu, choose 1) Port Selection. This selection connects the master
port to any of ports A through D. The port-selection menu shown in Figure 4-2
appears.
Figure 4-2. Port-selection menu.
Once you select a port, the Switch will clear the screen and generate the following
message:
x Selected (x=the programmed name of the port)
Enter ESC{PASSWORD}ESC to return to menu
A) PORT A
B) PORT B
C) PORT C
D) PORT D
X) Exit
Enter Port >
Remote Management Switch Ver XXX
1) Port Selection
2) Relay Control
3) Programming
X) Logout
Enter >