15
CHAPTER 4: Operation
4.2.3 P
ROGRAMMING
Figure 4-5. Programming menu.
1) Device Labels. This lets you change the screen labels for the ports and power-
control outlets.
Figure 4-6. Device labels.
Enter the label you want to change. The current label is displayed, along with a
prompt for the new name. Type in a new label and then confirm the selection.
Labels can be up to 24 characters.
Figure 4-7. Entering new label name.
CURRENT LABEL PORT A PORT A
NEW LABEL PORT A> Your New Name
PORT LABEL CHANGED FROM PORT A
TO Your New Name
SAVE CHANGES? (Y/N) >
A) PORT A
B) PORT B
C) PORT C
D) PORT D
1) Outlet 1
2) Outlet 2
3) Outlet 3
4) Outlet 4
X) Exit
Enter >
1) Device labels
2) Password
3) Baud: 19200
4) Parity/Data: N,8
5) Lead: N
6) Resp: Y
7) Mode: Modem
8) Cycle time: 5
9) Time out: 0
X) Exit
Enter >1