Filter
Top Products
19
CHAPTER 4: Operation
4.5 Manual Control of Ports
You can control the Switch manually via the pushbutton switch on the front panel.
Each time you press the button, the port will cycle to the next port. To return the
Switch to automatic operation, press the pushbutton switch for over two seconds.
All port LEDs will turn off.
The Timeout feature, if enabled, continues to operate when manual control is
established. To override this feature, select Timeout=0 from the Programming
menu.
When manual control is selected, lead control is locked out. Escape codes will
override the manual selection only in terminal mode.