Filter
Top Products
Product Overview
20 ETEP Installation Guide
Specifications
This section lists the mechanical and environmental specifications for the following ETEP models:
● ET0010A specifications are listed in Table 6
● ET0100A specifications are listed in Table 7
● ET1000A specifications are listed in Table 8
Network Support • Ethernet
• VLAN tag preservation
• MPLS tag preservation
• Jumbo frame support (ET0100A, CEP100-XSA, CEP1000,
ET1000A)
• Link state pass-through
• IPv4
• IPv6 (Layer 2 Ethernet encryption mode)
• NTP
• Host or gateway packet reassembly option
Policy Selector Options • Source or destination IP address
• Source or destination port number
• Protocol ID (Layer 3 IP packet and Layer 4 payload options)
• VLAN ID (Layer 2 encryption option)
• Multicast address
Table 6 ET0010A Mechanical and Environmental Specifications
Category Specification
Interfaces (2) 10/100 Mbps Ethernet ports for encrypting and decrypting
traffic
(1) 10/100 Mbps Ethernet auxiliary port (ET0010A only, not
enabled)
10/100/1000 Mbps auto-sensing Ethernet LAN port for
management
RS-232 port for management
Table 5 ETEP Feature Summary
Category Feature