Filter
Top Products
Specifications
ETEP Installation Guide 21
ET0010A
Electrical/Mechanical Dimensions
19 inch rack mount design
1u tamper evident chassis
Dimensions: 1.6” H x 8.0” W x 5.8” D
Weight (without external power supply),1 pound 4 ounces
External power supply:
• Weight: 11 ounces
• Input voltage: 100-240 VAC @ 1.5 amps, 50/60 Hz, auto-
sensing
• Output voltage: 12 VDC @ 5 amps
Nominal input current: 0.25 amps
Nominal power dissipation: 36 watts
Thermal power: In-rush 102 BTU/hour, steady state 102 BTU/
hour
Environmental Operating temperature: 0 to 40 degrees C (32 to 104 degrees F)
Operating humidity: Up to 90% (non-condensing)
Operating altitude: -200 to 10,000 feet AMSL
Regulatory See “ET0010A Regulatory Information” on page 66.
Table 7 ET0100A Mechanical and Environmental Specifications
Category Specification
Interfaces (2) 10/100/1000 Mbps Ethernet ports for encrypting and decrypting
traffic
10/100 Mbps auto-sensing Ethernet LAN port for management
RS-232C port for management
Electrical/Mechanical
Dimensions
19 inch rack mount design
1U tamper evident chassis
Dimensions: 1.75” H x 17” W x 10” D
Weight: 6 pounds
100-240 VAC @ 4 amps, 50/60 Hz, auto-sensing
Nominal input current: 1.0A
Nominal power dissipation: 65 watts
Thermal power: In-rush 380 BTU/hour, steady state 140 BTU/hour
Environmental Operating temperature: 0 to 40 degrees C (32 to 104 degrees F)
Operating humidity: Up to 90% (non-condensing)
Operating altitude: -200 to 10,000 feet AMSL
Regulatory See “ET0100A Regulatory Information” on page 67.
Table 6 ET0010A Mechanical and Environmental Specifications
Category Specification