Filter
Top Products
139
Appendix C: Summary Setup
V.42 ERROR CORRECTION OPTION:
NOTE
“V42 <1>” and “V42 <2>” are displayed to help indicate the relative
positions of individual options across the LCD.
V42 <1> V42 <2>
00335311 200001021
Link flow control: 0=disable, 1=enable, 2=slaved
DCE pass-through flow control: 0=disable, 1=enable
Selective retransmission: 0=disable, 1=enable
V42 bis: 0=disable, 1=enable
V.42 protocol: 0=LAPM only, 1=MNP only, 2=LAPM/MNP
DTE pass-through flow control: 0=disable, 1=enable
Flyback buffer: 0=enable, 1=disable
Break handling: 0=none, 1=destr./expedited,
2=nondestr./expedited, 3=non-destr./non-expedited
MNP class (limit): 0=class 1, 1=class 2, 2=class 3,
3=class 4, 4=class 5
Flow control, DCE to DTE: 0=none, 1=CTS, 2=DC1/DC2,
3=DC1/DC3
Flow control, DTE to DCE: 0=none, 1=RTS, 2=DC1/DC2,\
3=DC1/DC3
Parity: 0 =none, 1=odd, 2=even, 3=mark, 4=space
DTE speed (bps): 0=115.2 K, 1=57.6 K, 2=38.4 K, 3=19.2 K,
4=9600, 5=7200, 6=4800, 7=2400, 8=1800, 9=1200,
A=600, B=300
LEASED LINE OPTIONS:
L. L.
10020010
Auto-recovery test interval (min): 0=10, 1=20, 2=40, 3=60
Auto-recovery return (sec): 0=off, 1=10, 2=40, 3=60, 4=120
Auto-recovery select: 0=none, 1=dial if bad 30 sec,
2=dial if bad 1 min, 3=dial if bad 2 min, 4=dial if bad 3 min,
5=dial if bad 4 min, 6=manual recovery
Carrier detect level, leased (dBm): 0=-26,1=-33, 2=-43
TX level, leased (dBm): 0=0,1=-1 . . . 9=-9, A=-10 . . . F=-15
TX clocking: O=internal, 1=received clocking, 2=external
Answer/originate: 0=answer, 1 =originate