Filter
Top Products
130
Modem 34336
Appendix B: Quick Setup Configurations
Table B-1 shows the complete default configuration for each of the Quick
Setup modes. When you select a Quick Setup, the modem automatically sets
all options as indicated in the table. The options are listed in the same order
in which they appear on the LCD flow chart. See 2.0, Quick Start, for
instructions on selecting Quick Setups.
NOTE: All notes appear at the end of the table.
Table B-1. Quick Setup Configurations.
Default Settings Listed by Mode or Type of Operation
V.25 bis 2-WIRE 4-WIRE BELL
OPTION HAYES ASYNC
1
DUMB LEASED
2
LEASED
2
V.33 208
3
Line Type Line Type 2W-D 2W-D 2W-D 2W-LL 4W-LL 4W-LL 2W-D
Speed Speed, Max 19200 19200 19200 19200 19200 14400 4800
(Data
Rate) Speed, Min 300 300 300 4800 4800 12000 4800
Speed Type V.32 V.32 V.32 V.32 V.32 V.33 208
V.42 V.42 Mode Auto Auto
1
Auto Auto Auto OFF OFF
Error
Correction MNP Class
Options (Limit) 5 5 5 5 5 5 5
V.42 Break NDT/ NDT/ NDT/ NDT/ NDT/ NDT/ NDT/
Handling NEXP NEXP NEXP NEXP NEXP NEXP NEXP
V.42 LAPM/ LAPM/ LAPM/ LAPM/ LAPM/ LAPM/ LAPM/
Protocol MNP MNP MNP MNP MNP MNP MNP
V.42 bis Enable Enable Enable Enable Enable Enable Enable
Buffer Enable Enable
1
Enable Enable Enable Disable Disable
DTE Speed 38400 38400 38400 38400 38400 38400 38400
Flow Control DC1/ DC1/ DC1/ DC1/ DC1/ DC1/ DC1/
DTE-DCE DC3 DC3 DC3 DC3 DC3 DC3 DC3
Flow Control DC1/ DC1/ DC1/ DC1/ DC1/ DC1/ DC1/
DCE-DTE DC3 DC3 DC3 DC3 DC3 DC3 DC3
DTE Pass-thru
Flow Control Disable Disable Disable Disable Disable Disable Disable
See notes on page 127.