Filter
Top Products
95
5.0 Hayes Emulation Mode
• If profile 0 is recalled as the active configuration, the LCD screens reflect
the profile 0 configuration.
• If profile 0 is changed by means of Hayes commands or via the Summary
Setup feature and then saved, the changes made are reflected on the
LCD and are effective for all modes.
If you make option changes from the front panel without exiting the SETUP
menu, and then make option changes using Hayes commands and use the
&W command to save them to profile 0, the changes saved to profile 0
override the front-panel selections.
User Profile 1 is not linked to the front panel.
• Option changes made from the front panel are not saved to profile 1.
(Profile 1 can be changed only by using Hayes commands or the
Summary Setup feature.)
• If profile 1 is recalled as the active configuration, the LCD screens are not
affected. When profile 1 is active, it is possible for the LCD to display an
option setting not reflecting the setting currently in effect.
• If profile 1 is changed by means of Hayes commands or via the Summary
Setup feature, the changes are not reflected on the LCD and only affect
Hayes mode operation.
If profile 1 is being used as the active configuration, the options marked
with an asterisk (*) in Table 5-1 should be controlled either with the AT
commands listed in Table 5-1 or using the Summary Setup feature described
in Appendix C. When Profile 1 is active, these options can be changed via
the front-panel LCD, but the changes are effective only for Hayes mode
operation. However, if Profile 0 is subsequently recalled as the active
configuration, the changes are effective at that time.
5.5 Hayes Mode Reference Tables
Table 5-1 lists the Hayes compatible commands used with the Modem.