Filter
Top Products
724-746-5500 | blackbox.com
Page 50
Chapter 6: Operation
The UP and DOWN arrows rotate the “LETTERLOOP” to the
right and left. The SEL key copies the letter to the TEST NAME
LINE. Create a label: Rotate the letter loop until the letter or
command desired appears at the leftmost of the display and
press the SEL button.
Exercise the “Rotating Letter Loop”
It‘s the best way to learn how to create a name.
Exercise #1. Moving the LETTER LOOP.
1. Press the DOWN arrow for 5 seconds: The LETTER LOOP
continually rotates to the left.
2. Press the UP arrow for 5 seconds: The LETTER LOOP
continually rotates to the right.
3. Press the SEL key: The leftmost character of the LETTER LOOP
is always copied up to the TEST NAME line. If it is a space, a
space is copied. If it is a
u, the cursor moves to the right.
4. To exit back to the menu, use the arrow keys to position
“MENU” as the left-most character on the LCD and press SEL.
Exercise #2. Create the test name “TEST,” then erase:
Step 1: Position the LETTER LOOP so “T” is the left-most letter
on the screen (use the UP and DOWN arrow keys to position the
letter “T” at the left side of the LCD display).
Step 2. Press the SEL key, copying the “T” up to the TEST NAME
line. Now do the same for “E,” “S,” and “T.”
Step 3. If you make a mistake, try the letter loop’s “cursor
characters” (
t u). They allow you to control the cursor’s
position. To erase a character, write over the character with a
“space” (blank) character. There are three of these in the letter
loop. For instance, a space character is located between the “.”
character and the letter A.