Filter
Top Products
724-746-5500 | blackbox.com
Page 56
Chapter 6: Operation
Figure 6-60. Import Report screen.
5. Import Report: The LPV spreadsheet’s first step is to
automatically assign a COM (serial) port to your USB
connection and detect the LPV tester. The COM port number
selected is displayed in the window (1 through 9 is accept-
able). The "Import Reading" button will only be enabled if a
LPV tester is detected. If Detect Testers does not work, it will
respond with the error message “No Network Testers found.”
Verify the tester's power is ON and try again. If the problem
still persists, see “Error messages” below.
6. Press the Import Readings button next. It downloads data
from the serial port specified in the drop down box. Press OK.
Figure 6-61. Download succesful screen.
7. Error messages: If Excel says “Please select a serial port with a
network tester connected” or “No network testers found,”
communication is not established with the LPV’s USB port.
First check the connections: Is the USB cable firmly connect-
ed? Is Excel macro security set to low? Is the LPV powered
ON?